Created exclusively for foil surfing, the F-ONE Rocket Surf line gather all the shape features that will help getting the most out of the foil.
- Foil exclusive surf boards
- Easy take-off and maximum freedom in flight
- Equipped with track system & tuttle box
|Dimensions||128x48.5 cm||154.5x49.5 cm||174x51 cm||195x54.5 cm|
|Volume||26.5 L||35.5 L||41 L||52 L|
Once in the air, shorter board length translates directly into more freedom and possibilities.
Yet, enough volume is required to ensure the boards are accessible and facilitate the take-off. The Rockets therefore pack as much volume as decently possible into minimum board length. The result is a range of compact boards dispatched as follow: 4’2 (26.5l.) – 5’0 (35.5l.) – 5’8 (41l.) – 6’4 (52l.)
There is a size for everyone and every level from the pocket size 4’2 intended for experts to foil with maximum freedom, to the 6’4 that boasts volume and width suitable for learning.
Parallel rails and flatter rocker line in the center of the board make up for an easy and early take off. A distinctive kick in the rocker towards the tail helps with release and pumping.
The outline is kept wide on the nose to keep these short boards user friendly.
All boards are fitted with a both a US track system and a tuttle box to accommodate any foil with a tuttle head or a 4-bolt top plate.
They are built with a light and tough bamboo sandwich laminate around a lightweight EPS core, thereby achieving a great resistance to weight ratio. The boards come with a tail pad, while a front pad is included as an accessory which can be fitted on or not depending on personal preferences.
Bamboo construction combines glass fiber and bamboo veneers wrapped around the board into what is called a sandwich composite construction to achieve better resistance, weight and stiffness. The bamboo veneers are placed in-between two or more fiberglass layers and this increases the characteristics of the composite material. We can therefore use less fiberglass to save weight and reach a board which is even more robust.
The twin track system with lateral spacing of 90mm is becoming an industry standard. This system is compatible with all foils featuring a top plate with 4 fastening bolts. The length of the tracks enables some room to adjust the position of the foil on the board to reach everyone’s prefered balance.
The tuttle box is a fin box standard of the windsurfing industry. With the angled front and back faces the tuttle head is firmly maintained inside the box. Its shallower depth makes it more suited for the smaller boards.
FRONT PADS (unglued)